How To Plumb An Outdoor Shower

An outdoor shower is a great way to cool off on a hot day, rinse off after a swim, or wash your feet before going inside. It can also be a great addition to your backyard if you have a pool or hot tub.

Plumbing an outdoor shower is not a difficult project, but it does require some basic plumbing skills. If you are not comfortable working with plumbing, it is best to hire a plumber to do the job for you.

Materials You Will Need

Outdoor shower head
Shower arm
Mixing valve
PEX tubing
PEX fittings
PVC pipe
PVC fittings
Concrete
Gravel

Steps

1. Choose a location for your shower. The best location for an outdoor shower is a sunny spot that is close to a water source. You will also need to make sure that there is enough space to install the shower and that there will be no obstructions overhead. 2. Dig a hole for the shower base. The hole should be about 12 inches deep and 24 inches wide. 3. Fill the hole with gravel. The gravel will help to drain the water away from the shower base. 4. Install the shower base. The shower base should be level and flush with the ground. 5. Install the shower head. The shower head should be installed on the shower arm, which is then attached to the mixing valve. 6. Install the mixing valve. The mixing valve is what controls the temperature of the water. 7. Connect the PEX tubing to the mixing valve. The PEX tubing will carry the water to the shower head. 8. Connect the PVC pipe to the PEX tubing. The PVC pipe will carry the water from the mixing valve to the water source. 9. Bury the PVC pipe. The PVC pipe should be buried at least 12 inches below the ground. 10. Connect the water source to the PVC pipe. The water source can be a garden hose, a well, or a city water line. 11. Pour concrete around the shower base. The concrete will help to hold the shower base in place and prevent water from leaking out.